Welcome to the official website of Haining Kezhun Filter Equipment Co., Ltd.!

Engaged in water treatment technology development and industrialization work for 14 years

KeZhun——Specializing in the production of high-standard filter fluid equipment and various filter materials (source manufacturers)

Helpline:

+86 0573-8768-8081

+86 13906737669

PRODUCTS

Home page

Main products

Microporous titanium rod filter微孔钛棒滤芯

Category:

Millipore Titanium-rod Cartridge

Microporous titanium rod: A titanium filter excellent performance and advantages: 1, high strength, strong pressure: (not falling) 2, uniform structure, porosity, filtration resistance, go

Online Message

Detailed introduction

Microporous titanium rod :

A titanium filter excellent performance and advantages:

1 , high strength, strong pressure : ( not falling )

2 , uniform structure , porosity, filtration resistance , good permeability ;

3 , high ( low ) temperature performance is strong ; ( steam filters )

4 , anti- corrosion ability ; ( no liquid in the water and rust )

5, long life ; ( for the general membrane filter several times )

6 , high hardness , backwashing is easy ; ( easy to implement online flushing )

7 , on human affinity ability ;

8 , molding, machining convenience, can be processed into various shapes according to requirements of the filter .

Second, the typical application of titanium filter ( medicine, electronics, food and beverage , petrochemical , power plants and other industries )

1, the liquid off the carbon filter ;

2 , chemical reagents filter ;

3 , ozonated water filtration ;

4 , purified water , mineral water terminal filter ;

5 , steam filters ;

The filter Size:

Diameter : ∮ 30 ∮ 50 ∮ 60

Length : 5 " 10 " 20 " 30 " 40 "

Filtration : 0.45um 1um 3um 5um 10um 20um 30um 40um 50um

Third, the high molecular weight polyethylene filter characteristics and performance:

1 large flow: high porosity ( 60% ) to ensure a greater flow of fluid per unit area ;

(2) a smooth outer surface : smooth outer surface , easy adhesion of impurities , easier to thoroughly backwash ;

3 dirt capacity : outside the small inner filtration large impurities that can not be retained in the filter body can be pressed on the sludge to 70 % moisture ;

4 excellent value for money : the filter integrated performance , cheap , suitable for water treatment, beads also environmentally friendly sewage treatment, water reuse , chemical products and other high traffic filtering condition situation .

A resistance to acid, alkali corrosion , resistance to organic solvents dissolve ;

(2) excellent strength and wear resistance to ensure its service life ;

3 external light easy adhesion surface of the impurities ;

4 recoil blowback easy reuse ;

5 good toughness , filter easy to break ;

6 . Absolutely no threshing phenomenon ; 7 . Pressure ability.

The filter Size:

Diameter : ∮ 20 ∮ 25 ∮ 30 ∮ 35 ∮ 40 ∮ 45 ∮ 50 ∮ 60

Length : 5 " 10 " 20 " 30 " 40 "

Can also be produced on request of large diameter (∮ 1000) of the filter

Filtration : 0.3um 0.45um 1um 3um 5um 10um 20um 30um 40um 50um

● Sintered PTFE filter is made of pure PTFE materials , high temperature , high pressure sintering , and therefore the filter has a strong acid , strong base capacity of the filter are high strength and toughness , while the filter can be high temperature up to 200 ℃, the " filter of the king" reputation .

● The company produces PTFE filter, using a standard interface in the form M20, 222 and 226 interfaces form , can be interchanged with other filter , both horizontal push , pressure plate interface for precise dimensions and steam filters , you can also Upon request made into various types of interfaces.

Filter specifications :

Diameter : ∮ 20, ∮ 25 ∮ 30 ∮ 35 ∮ 40 ∮ 45 ∮ 50 ∮ 60

Length : 5 " 10 " 20 " 30 " 40 "

Can also be produced on request of large diameter (∮ 1000) of the filter

Filtration : 0.3um 0.45um 1um 3um 5um 10um 20um 30um 40um 50um

上一个： Microporous titanium rod filter

下一个：