Polyether sulfone (PES) porous folded filter element
Polyethersulfone filter, the filter medium is the world's advanced polyethersulfone microporous membrane, polyethersulfone membrane filter pore volume r
Polyethersulfone filter, the filter medium is the world's advanced polyethersulfone microporous membrane , polyethersulfone membrane filter pore volume representing 80% of the pore opening ratio , has a unique geometry, improved filtering solution for difficult filtration efficiency and liquidity. Using polyether sulfone, and a combination of two materials melt polypropylene support structure, no adhesive material , the more stringent requirements for the chemical and pharmaceutical industries.
Main features: unique hydrophilic properties, surface active agents and the surface free of lubricants, the solution was filtered to provide a high level of precision and liquid filtration , for a wide range of PH , the protein and the adsorption amount of valuable low biological agents , retention rate, has excellent chemical resistance and thermal stability, strength and good resistance to pressure surges forward and reverse , all products are 100% integrity tested.
Product specifications and technical parameters:
Filter Media: Hydrophilic polyethersulfone microporous membrane
Upstream and downstream support Material: Polypropylene
Support the Canadian and structural components: Polypropylene
Filtration : 0.1,0.2,0.45,0.65,1.0 (μm)
Filter Length: 5 ", 10 ", 20 ", 30 ", 40 "
Sealing material: silicone rubber, NBR , EPDM , Viton
Closed mode: fusion welding
Effective filtration area : ≥ 0.6 m / 10 "
Filter diameter : 69.0mm
Maximum operating temperature : 85 ° C, 0.5Mpa
Highest tolerable temperature : 140 ° C, 0.28Mpa
The maximum positive pressure : 0.42Mpa (25 ° C)
Maximum back pressure : 0.21Mpa (25 ° C)
Sterilization conditions : 121 ° C
Other: special specifications can be customized diameter and various jacks
1 , the pharmaceutical industry: injection, water for injection , eye drops , non- high-temperature sterilization products , biological products, vaccines, serums and other terminal sterilization filter
2 , the food industry : wine, mineral water , drinking water , beverages and other filters
3 , the electronics industry : high water, ultra- pure water equipment, chemical raw materials and other terminal filter
Integrity test ( minimum bubble point ) (25 ℃; water )
0.10 um> = 0.40 MPa
0.20 um> = 0.30 MPa
0.45 um> = 0.20 MPa
Water flow - pressure curve